Our punch press
has 10 tons of punching power. Just bolt it to your bench, connect the
pump and hook up an air supply. This is great for punching holes in all
types of material. This contains the press, die holder and foot operated
air over hydraulic pump.
- 10 ton cylinder
- 10 ton air/hydraulic pump
- die holder
- 12 inch throat depth
- material thickness must be less than 3/8"
- unit measures 8 inch wide, 24 inches deep, 18
inches tall
- shipping weight 200 pounds
- Optional punch Round 3/16" to 1"
- Optional punch Square 1/4" to 1"
- Optional punch Oblong 5/16" x 1"
- Optional Outside Radius Corner 3/4"
|
To see tons of pressure required
to punch mild steel, click here
|
