Tools Plus

HOURS:

 East: Monday - Friday: 9:30 to 7:00 Saturday: 10:00 to 2:00
3245 Piqua-Troy Road West: Monday - Friday: 6:30 to 4:00 Saturday: 7:00 to 11:00
Troy, Ohio 45373

Phone: 1-937-339-6829

   Fax: 1-937-335-7289  

Tapco Siding Equipment
HVAC Shop
Sheet Metal Shears
Sheet Metal Brakes
Rotary Cladding / Forming
Lock Forming Pittsburgh
Slip Rolls
Roll Former
Power Flanger
Collar Machine
Hand Flanger
Button Lock
Gang Slitter / Beader
Sheet Metal Shop
Metal Cutting
Sand Blasting
Machine Shop
Tube Benders
Iron Worker - Punch Press
Rollers & Shapers
Sanders & Finishers
Trailers
Welding Supplies
Instructional Items
Informational Pages
Recommended Sites

Checkout

 L20 Pittsburgh Machine

L-20 lock forming pittsburgh
Standard lock formed in board sample
Standard lock formed in board

This new lock forming machine works great for 20 to 26 GA. galvanized steel. It runs 25 feet per minute. This unit works on 110 volts, v belt drive, and comes complete with a standard set of lock forming dies.  Buy it today and start making your job easier and more profitable.

SPECIAL DISCOUNT -
NOW WHILE SUPPLIES LAST

lock former with flange attachment
Lock Forming Pittsburg Machine $3395 Add to Basket
L-20 Part - 2020 Opening Roll Assembly $50 Add to Basket
L-20 Part - 2020 Opening Roll Assembly (4) $190 Add to Basket
Optional Roll DSR-20 $595 Add to Basket
Optional Roll DCR-20 $595 Add to Basket
Optional Roll RAR-20 $595 Add to Basket
Optional Roll FA-20 $1195 Add to Basket
L-20 SPECIFICATIONS:
CAPACITY 20 to 26 Gauge (0.5 - 1.0 mm) Uses approximately 1" of material
DEPTH OF POCKET 5/16" (8 mm) Width of hammer-over edge adjustable up to 3/8" (9.5 mm)
SPEED 25 Feet per minute
MOTOR 1 HP single phase (Optional 3 phase) AC motor manual switch
DRIVE V-belt
STAND Arc welded steel. Heavy top plate
FEATURE All steel forming hardened ground shafts, case hardened steel forming rolls, machine cut gears and needle type roller bearing throughout.
DIMENSIONS 36" (915 mm) x 16 1/2" (420 mm) x 36 1/2" (927 mm)
ELECTRICAL REQUIREMENT 110 V, 1 PHASE
SHIPPING WEIGHT Approximately 320 lbs.

OPTIONAL ROLLS - STANDARD ROLLS MOUNTED ON OUTBOARD SHAFTS

  Roll Capacity Approx. Material
Double Seam Rolls - Lock Forming Machine DSR-20 20 to 26 gauge 1" (25 mm) 3/8" seam (9.5 mm)
Drive Cleat Rolls - Lock Forming Machine DCR-20 20 to 26 gauge 2 1/8" (54 mm) 1 1/8" width (28 mm)
Right Angle Flange Rolls - Lock Forming Machine RAR-20 20 to 26 gauge Up to 3/8" (9.5 mm) Up to 3/8" (9.5 mm) High
  FA-20 20 gauge

Flange attachment

Free shipping on quality tools and equipment
Alaska, Hawaii, International and Trailer Orders will incur additional Shipping charges

Homepage  |   About Us  |  Warranty & Returns  |  Email Us   |   Search our Site   |   Sitemap

DESIGNED AND MAINTAINED BY SHANNONS DESIGNS