Super-Bender 060

SUPER-BENDER 060

Bends 1/4" to 2" outside diameters
Bends to 90 degrees in fourteen seconds
Patented tooling system achieves centerline radius two times diameter without a mandrel
24-volt low voltage control
Electronic motor brake and constant speed control for greater accuracy
Programmable bend angle with display 0 to 180 degrees
Programmable material spring back settings with display ensures bend accuracy for a wide variety of material
Remote foot pedal standard for hands free operations
Patented swing away counter bending tool support system
Hex mounted formers for rapid tool changes
Comprehensive one year warranty
Tool free tooling changes with multiple CLR available for each diameter
No hydraulic components

Dimensions and Specifications
Height	36"
Length	24"
Width	10"
Bending Speed	1.7
Operating Voltage	120V single phase 50 - 60 Hz
Min. and Max. CLR	3/8" - 8 7/8"
Bending Angle Range	0 -180 degrees
Weight	189 lbs.

Patented swing away counterbending die vise
increases bending productivity.

Super-Bender Bending Capacities
Material Type	Maximum Diameter	Maximum Wall Thickness
Pipe	1.500 pipe	SCH 40
Mild Steel Tube	2.000	.140
Soft brass	1.875	.125
Stainless Steel	1.875	.109
Welded tube for furniture	2.125	.125
ST35 hydraulic tube	2.000	.156
304L stainless tube	2.500	.125
Hard copper & Aluminum	2.500	.156
Round solids	1.250	NA
Rectangular solids	.312 x 1.875	NA
Rectangular tube	.812 x 1.562	.125
Square tube	1.562 x 1.562	.125
Solid square	1.187 x 1.187	NA
Mild steel T	1.562 x 1.562	.187
Mild steel C channel	1.250 x .625	.187

Super Bender Tooling Kits

S060 with "Small Radius" Tube Kit TUBEKIT2SR
Tube Size	CLR	Min. Wall	Former Part #	Counter Bend Die # Part #
3/4"	2.600	.039	TOO-153R067T0750	TOO-154T0750
7/8"	2.200	.059	TOO-153R056T0875	TOO-154T0875
1"	2.600	.059	TOO-153R067T1000	TOO-154T1000
1 1/4"	3.200	.079	TOO-153R082T1250	TOO-154T1250
1 1/2"	3.900	.079	TOO-153R100T1500	TOO-154T1500