| Consumer Grade Sheet Metal Brakes
- Click Images to purchase or for more details |
28" Modified
30" Modified
IBP 2420
IBP 3620
IBP 4816
Standard Sheet Metal Brakes
Box and Pan Brakes
Be sure to check out our
Sheet
Metal Brake Adjustment Information
Stand for 3'-4' Brakes |
 |
28" Modified Sheet
Metal Brake
This open throat brake can bend 28" lengths of 18 GA. mild steel
(.050") and thicker pieces in shorter lengths. Use this to make all
kinds of body panels, gutters, brackets, braces and more. Bend up to
about 100 degrees!
|
 |
30" Modified
Sheet Metal Brake
This open throat brake can bend 30" lengths of 18GA. mild steel.
(.050") and thicker pieces in shorter lengths. Use this to make all
kinds of body panels, gutters, brackets, braces and more. Bend up to about 100
degrees! Weight: 30 lbs.
|
 |
IBP4816 Sheet
Metal Brake
Box & Pan sheet metal brake. This is a box and pan brake,
meaning it will bend 4 sides of a box, up to 2-1/2" deep, up to
50" long of 16 GA. (.063) steel. It will bend heavier metal in
shorter lengths, making it great for most any shop. This brake is new,
made in China, and is of very good quality.
|
 |
IBP2420 24" Box
and Pan Sheet Metal Brake.
The removable and adjustable fingers can be installed in a variety
of positions to accommodate varying widths of metal. This model
bends mild steel up to 20 gauge thick, 24" wide, and ranging in
angle from 0° to 135°.
|
| |
 |
Standard Sheet
Metal Brakes
The Sheet Metal Brake can be used to make auto body panels such as
door skins, wheel tubs, fan guards, heat deflectors, boxes, and
custom fabrication that requires the bending of sheet metal. One piece clamp,
capable of bending 2 sides and sometimes 3 sides (depending on height) of sides of
a box or pan *Standard models have openings at
each end of the clamp to allow you to form three sides of a pan.
Sizes from 3 to 8 feet Bending lengths.
|
| |
 |
Box and Pan Sheet
Metal Brakes
Clamp made of many sections, often called fingers, that can be grouped
together to match the length of a box. A box & pan brake is capable of bending 4
sides of a box or pan. Very Desirable! Box & Pan segment widths: 1@ 2
inch, 2@ 3 inch, remaining are 4 inch. 3 Foot to 8' 4" Bending
lengths.
|
| |
|
|
