Keep guards in place and in working order.
Keep all body parts away from moving parts. Avoid placing any
part of your body near belts, cutters, gears, etc.
Do not exceed rated capacity.
Keep the work area clean. Cluttered areas and workbenches invite
Keep children away. All visitors should be kept a safe distance
from the work area.
Don't force the machine. It will do the job better and safer at
the rate for which it was designed.
Use the right machine. Don't force a machine or attachment to do
a job for which it was not designed.
Wear proper apparel. Do not wear loose clothing, gloves,
neckties, rings, bracelets, or other jewelry which may get caught in
moving parts. Non-slip footwear is recommended. Wear protective hair
covering to contain long hair.
Always use safety glasses.
Don't overreach. Keep proper footing and balance at all times.
Never stand on a machine. Serious injury could occur if the
Check damaged parts. Before further use of the machine, a guard
or other part that is damaged should be carefully checked to
determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that
may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced.
Sheet metal stock has sharp edges. To prevent cuts, use caution
Keep hands and fingers clear of the area in front and rear of
Do not use the machine for any purpose other than for which it
Failure to comply with all of these warnings may cause serious
Do not operate tool while under the influence of drugs, alcohol
or any medication.