• Capacity:
  Slitter 3 cuts on 22 ga. and lighter
  Beader 3 beads on 22 ga and lighter
• Speed: Approximately 60 feet per minute
• Motor:
  GS-336 - 1/2 H.P. 115/1/60/60 R.P.M. Gear Motor
  GS-348 - 1/2 H.P. 115/1/60/60 R.P.M. Gear Motor
  GS-360 - 1/2 H.P. 115/1/60/60 R.P.M. Gear Motor
• Drive: Roller Chain
• Base: Arc welded steel
• Dimensions:
  GS-336 - 50" long, 31" wide. Feed table height 34"
  GS-348 - 62" long, 31" wide. Feed table height 34"
  GS-360 - 74" long, 31" wide. Feed table height 34"

• Shipping Weight:
  GS-336 approximately 535 pounds
  GS-348 approximately 640 pounds
  GS-360 approximately 745 pounds

This series of Flagler Sheet Gang Slitters allows for 3 cuts on 22 gauge and lighter at a speed of approximately 60 lineal feet per minute. This unit is available in 3 models - 36" , 48" and 60" widths.

A fully adjustable feed gauge allows for the slitting of any increments down to and including a 4" wide starting blank. These Flagler slitters will slit bronze, aluminum, brass and other materials as well as conventional galvanized sheets.

All blade assemblies are fully adjustable over the width of this machine. Micrometer adjustments on the main slitting arbor for fast, positive adjustment. Completely guarded for safety. This unit is self feeding, and is powered by a 115 volt motor that can be plugged into any 115 volt outlet.