| DELUXE HYDRAULIC SHEARS |
- Spring hold down.
- Two 24" front support arms.
- 24" manual back gauge with wheel
- Safety full length finger guard.
- High grade, high carbon/ chrome
- Toolbox and leveling pads
- 2-edge upper blade & 4-edge bottom blade, 60
hrc.
- Two 14" side gauges (R/L) with dual scales
- Removable foot control pedal with safety protection
- Fully hydraulic control and safety protection
system.
- Electric control selection for single / continuous
mode.
|
|
Has high carbon, high chrome alloy steel
blades, finger guard, back gauge, front gauge, side gauge, front support
and fully hydraulic system. High quality metal cutting shear, great
addition to any metal shop. |
| Model |
H-5210 |
H-5214 |
| Cutting Length |
52" |
52" |
| Cutting Mild Steel |
10 GA. |
14 GA. |
| Cutting Stainless Steel |
13 GA. |
18 GA. |
| Rake Angle |
1°40' |
1°40' |
| Stroke per/ min. |
30 |
35 |
| Motor Power |
5 HP |
3 HP |
| Front Gauge |
24" |
24" |
| Back Gauge |
24" |
24" |
| Shipping Weight |
3,000 lbs |
1,900 lbs. |
| Packing size |
76" x 36" x 55" |
75" x 36" x 53" |
| Electrical Requirements |
220V or 440 V
3 Phase
Prewired on 220V |
220V or 440 V
3 Phase
Prewired on 220V |
|
 |
|
