This pan and box brake is an indispensable
tool if you need to increase the strength of sheet metal plates with
bends, or you intend on fabricating more complicated brackets, gussets,
boxes, or fixtures. The removable and adjustable fingers can be
installed in a variety of positions to accommodate varying widths of
metal. This model bends mild steel up to 20 gauge thick, 24" wide, and
ranging in angle from 0° to 135°.
- Material Capacity: 24" x 20 gauge mild steel
- Brake angle: 0-135 degrees
- Box fingers: 2-1", 4-2", 2-3", 2-4"
- Weight: 91 lbs.
|
 |
