Box & Pan sheet metal brake. This is a box and pan brake,
meaning it will bend 4 sides of a box, up to 2-1/2" deep, up to
50" long of 16 GA. (.063) steel. It will bend heavier metal in
shorter lengths, making it great for most any shop. This brake is new,
made in China, and is of very good quality.
- 1/4 inch minimum reverse bend
- 2 inch removable apron support
- bends from 0-135 degrees
- adjustable radius - setback 0 to 1/2 inch
- moveable or removable fingers
- finger tips are flame hardened
- bending length 50 inches or less
- maximum box depth is 2-1/2 inches
- overall size is 60 inches long
- 12 inches deep, 18 inches tall
- unit weighs 350 pounds
- stainless capacity is 20 gauge
- aluminum capacity is 14 gauge
- mild steel is 16 gauge
- can bend shorter lengths of thicker steel
|
