| Industrial Grade
Sheet Metal Brakes - Click Images to purchase or for more details |
Radius Brakes
IBP 4812C
IBP 7212
IBP 9712
Heavy Duty Sheet Metal Brake
Heavy Duty Box and Pan
Sheet Metal Brakes
Floor Type Manual
Brake
Hydraulic Brakes
Be sure to check out our Sheet
Metal Brake Adjustment Information |
 |
Radius
Brakes
The apron swings
OUTSIDE the radius and it ROLLS to minimize stress and scraping on your
material. Great for radii from 1/8" or smaller, to 3" & larger. (Reminder:
radius equals one half of the diameter). Mild Steel Capacity: 6' model w 1/2" radius (72"
16ga, 48" 14ga, 24" 12ga, 4" of 1/4 mild steel)
|
|
 |
IBP4812C -
This pan and box brake is great for forming extra-wide or long
pieces of sheet metal. It can bend boxes or pans up to 6" deep, and
bend 48" wide mild steel up to 12 gauge thick, from 0 to 135
degrees!
|
|
 |
IBP7212 Sheet
Metal Brake
This imported heavy duty box and pan brake
sheet metal brake comes loaded
with potential. A great sheet metal fabrication addition to your garage or shop
equipment.
|
|
 |
Floor Type
Manual Brakes
|
|
 |
Hydraulic Box and
Pan Brakes
|
 |
Standard and Heavy
Duty Sheet Metal
Brakes
The Sheet Metal Brake can be used to make auto body panels such as
door skins, wheel tubs, fan guards, heat deflectors, boxes, and
custom fabrication that requires the bending of sheet metal. One piece clamp,
capable of bending 2 sides and sometimes 3 sides (depending on height) of sides of
a box or pan *Standard models have openings at
each end of the clamp to allow you to form three sides of a pan.
Sizes from 3 to 10 feet Bending length.
|
| |
 |
Standard and
Heavy Duty Box and Pan Sheet
Metal Brakes
Clamp made of many sections, often called fingers, that can be grouped
together to match the length of a box. A box & pan brake is capable of bending 4
sides of a box or pan. Very Desirable! Box & Pan segment widths: 1@ 2
inch, 2@ 3 inch, remaining are 4 inch. 3 Foot to 10" Bending
lengths.
|
