HOURS:

Phone: 1-937-339-6829

Checkout

A band saw is a must for any metal shop, and with three speeds, an automatic shut off, and ball bearing blade guides, this bandsaw comes equipped with many important performance features. As an a   d   ded feature it has a swiveling headstock so there is no fussing with establishing the cut angle at the vise. Just set the work piece length, and swivel the headstock to an angle between -45° and 60° and make the cut.

• Motor: 1/3 HP, 110V/220V, single-phase, 60 Hz, 1720 RPM
• Amps: 7/3.5
• Drive: V-Belt
• Transmission: sealed worm gear
• Max. capacity rectangular @ 0° : 5" x 6"
• Max. capacity circular @ 0° : 5"
• Max. capacity rectangular @+ 45° : 2 15/16" x 3 3/4"
• Max. capacity circular @+ 45° : 3 3/4"
• Max. capacity rectangular @+ 60° : 1 3/4" x 2 3/16"
• Max. capacity circular  @+ 60° : 1 3/4"
• Blade speeds: 80, 120, 200 FPM
• Overall height: horizontal 42 1/2" ; vertical 54 3/4"
• Floor to table height: 29"
• Overall width: 23 3/8"
• Overall length: 39"
• Overall bed: 19 1/4" x 13 1/2" x 3"
• Footprint: 26 1/2" x 20 1/2"
• Angular cuts: -45° to + 60°
• Blades size: 64 1/2" x 1/2"
• All ball bearing drive wheel and blades guides
• Approximate shipping weight: 176 lbs.