HOURS:

Phone: 1-937-339-6829

Checkout

This roller is designed to make rings, bands, circles, and large sweeping radius bends in all types of metal. Great for gates, arches, and 360 degree circles. It works on round pipe or tube with an outside diameter of 1.125" or smaller. You can also make bands or rings out of flat steel, square stock or round bar. It has a forward-reverse switch, jog-run switch and an emergency stop switch. Foot pedal control with forward and reverse.

Capacity pipe or tube 1.125" O.D. x .063" wall or smaller Capacity square tube 1.125" O.D. x .063" wall or smaller Capacity solid round bar 5/8" or smaller Capacity solid square stock 5/8" or smaller Capacity flat steel 1.125" x .125" or smaller Bends 0 to 360 degrees (1) die set for flat (2) die sets for round 1-1/8" and 3/4" (2) die sets for square 1-1/8" and 3/4" 1 idler and 2 drive rollers Manual adjustment (for downward force) 9 RPM 110 volt 2 hp motor Forward-reverse switch Forward-reverse pedal control Jog-run switch Emergency stop switch Overall size 43" tall, 26" wide, 20" deep Shipping weight 650 pounds