|
 |
- Bending capacity 1/4" to 3"
- Bends to 180° with maximum CLR of 15"
- CLR as small as 2D with non-mandrel tooling
- PLC stores (30) programs (9) bends within each (75)
program memory chip available
- Step-by-step programming with multi-language
capability
- Ideal for bending pipe, tube, squares, rectangles,
solids and other profiles
- Programmable material spring back
- Digital counter bend die positioning
- Patented tooling system with multiple radii available
- Two bending speeds
- Remote foot pedal allows hands free operation
- Patented swing away counter bending die vise
- Portable with base wheels and lift handle
- Replaces outdated ram style hydraulic benders
- Accepts Erolina's two axis A40/P positioning table
for multiple and sequential bends
- Hex mount tooling system for rapid changeover
- Available in 220 or 440V
Click here for the AP40 Two Axis Positioner
|
Dimensions &
Specifications |
| Tube Capacity |
3" |
| Pipe Capacity |
2-1/2" Sch. 40 |
| Square Tube Capacity |
2" |
| Minimum Diameter |
1/4" |
| Maximum Diameter |
3" tube / 2-1/2" Sch. 40 pipe |
| Minimum CLR |
2D |
| Maximum CLR |
15" |
| Angle Range |
0-180 degrees |
| Bending Speed |
.75 or 1.5 RPM |
Programming "Touch Pad"
|
PLC (30) programs
(9) bends within each
(75) memory chip available |
| Mandrel Capable |
No |
| Three Axis Control |
Manual |
| Two Axis Positioner |
Yes |
| Voltage Requirement |
220 or 440V 3ph |
| Motor |
4.5 hp 50-60Hz |
| Height |
39" |
| Width |
20" |
| Length |
30" |
| Shipping Weight |
450 lbs. |
|
