YCL 1660 High Speed Precision Gap Bed Metal Lathe

Tools Plus	HOURS:	East:	Monday - Friday: 9:30 to 7:00	Saturday: 10:00 to 2:00
3245 Piqua-Troy Road		West:	Monday - Friday: 6:30 to 4:00	Saturday: 7:00 to 11:00
Troy, Ohio 45373	Phone: 1-937-339-6829		Fax: 1-937-335-7289

Tapco Siding Equipment
HVAC Shop
Sheet Metal Shop
Metal Cutting
Sand Blasting
Machine Shop

Mill Drills

Milling Machines

Lathes

Digital Readouts
Tube Benders
Iron Worker - Punch Press
Rollers & Shapers
Sanders & Finishers
Trailers
Welding Supplies
Instructional Items
Informational Pages
Recommended Sites

Checkout

high speed precision gap bed lathe
This high speed precision lathe comes with many features including one-piece cast iron body, no change gears required, 60 kinds of inch threads from 112 -2 TPI, fine grain high tensile cast iron bed. Main spindle, bedways, gears and all shafts are hardened and precision ground. Make the most of your machine shop with this piece of equipment.

YCL 1660 High Speed Precision Gap Bed Lathe

$10990

Add to Basket

Standard Features:

Follow rest
14" face plate
7 1/2" steady rest
10" 3-jaw chuck , 12" 4-jaw chuck
Coolant system & Halogen work light
Movable gap
4-way tool post
Thread chasing dial
Hand oil pump for ways
Automatic kick-out longitudinal carriage stop
Full length foot brake & full length splash guard

Capacities:		Feeds & threads:
Max. swing over bed	16 1/8"	Longitudinal feeds	.0011" - .0633" / REV., 42 kinds
Max. length of workpiece	60"	Cross feeds	.00033" - .01837" / REV., 42 kinds
Max. swing over carriage	8 13/16"	Metric threads	0.1 - 14 MM
Max. swing in gap	25 3/16"	Inch threads	112 - TPI, 60 kinds
Effective length in gap	9 1/2"	Module threads	0.1 - 7 MM 34 kinds
Width of bed	11 13/16"	Diametral pitch threads	112 - 4 DP, 50 kinds

Headstock:		Tailstock:
Spindle Nose	D1-6	Diameter of tailstock quill	2 3/8"
Diameter of spindle thru bore	2 9/32"	Taper of tailstock quill center	M.T. #4
Taper of spindle center	M.T. #6 (sleeve #6 / #4)	Max. Travel of tailstock quill	4 13/16"
Spindle speeds	25 - 2,000 RPM, 12 steps
		Motors:
Carriage:		Power of main motor	5 HP 220V/440V, 3Phase, pre-wired on 220V
Max. travel of cross slide	12 3/16"	Power of coolant pump	1/8 HP
Max. travel of top slide	5"	Overall Dimensions (WxLxH)	107" x 41" x 53"
		Net weight lbs.	5,100

DESIGNED AND MAINTAINED BY SHANNONS DESIGNS