Standard Features:
- 10 HP Main Motor
- One-piece cast iron base
- D1-8 Spindle with 3 - 1/8" bore
- NO CHANGE OF GEARS REQUIRED
- 12 Speeds from 45-1,600 RPM
- 60 Kinds of inch threads from 112-2 TPI
- 47 Kinds of metric threads from 0.2 - 14 MM
- Main Spindle hardened & precision ground
- Bed made of fine grain high tensile cast iron
- Bedways induction hardened & precision ground
- All gears & shafts hardened & precision ground
- Main spindle supported at 3-point by precision
bearings
|
Capacities: |
|
Feeds
& threads: |
|
| Max.
swing over bed |
20" |
Longitudinal
feeds |
35 Kinds, 0.0022" - 0.0612"/rev |
|
Distance between centers |
80" |
Cross
feeds |
35 Kinds, 0.00048" - 0.01354"/rev |
|
Max. effective cutting length |
75-1/2" |
Metric
threads |
47 Kinds, 0.2 - 14mm |
|
Max. swing over cross slide |
11-7/8" |
Inch
threads |
60 Kinds, 112 - 2 TPI |
|
Max. swing in gap |
29" |
Module
threads |
39 Kinds, 0.1 - 7mm |
|
Effective length in gap |
6" |
Diametral
pitch threads |
50 Kinds, 4- 112 DP |
|
Width
of bed |
13-3/4" |
|
|
| |
|
Tailstock: |
|
|
Headstock: |
|
Diameter
of tailstock quill |
3" |
|
Spindle
Nose |
D1-8 |
Taper
of tailstock quill center |
M.T.
#5 |
|
Diameter
of spindle thru bore |
3-1/8" |
Max.
Travel of tailstock quill |
7" |
|
Taper
of spindle center |
M.T.
#7 / M.T. #5 |
|
|
|
Spindle
speeds |
25,35,55,80,120,170,235,350,525,700,1100,1600 rpm |
| |
|
|
|
|
Carriage: |
|
Motors: |
|
|
Max.
travel of cross slide |
12
15/16" |
Power
of main motor |
10HP, 230/460V/60HZ, 3 Phase prewired 230V |
|
Max.
travel of top slide |
5-18" |
Power
of coolant pump |
1/8HP,230/460V/60HZ, 3 Phase prewired 230V |
|
4-way tool post size |
1" x 1" |
Overall
Dimensions (WxLxH) |
134" x 44" x 56" |
|
Longitudinal leadscrew dia./pitch |
Dia. 1 -5/8" / 4 TPI |
Net
weight lbs. |
7,500 |
|
Monday - Friday:
9:30 to 7:00
